Digilent 410-211P-KIT Uživatelský manuál stáhnout pdf (Strana 1)

1300 Henley Court

Pullman, WA 99163

509.334.6306

www.digilentinc.com

chipKIT™ Network Shield™ Board Reference Manual

Revised December 29, 2014

This manual applies to the chipKIT Network Shield rev. E

DOC#: 502-211

Other product and company names mentioned may be trademarks of their respective owners.

Page 1 of 10

Overview

The chipKIT Network Shield is an input/output expansion board designed for use with the chipKIT Max32™

microcontroller board. It has circuitry and connectors that enable you to exploit the advanced communications

features of the PIC32MX795F512L microcontroller on the Max32.

The Network Shield has a 10/100 Mbps Ethernet PHY to enable connection to an Ethernet network. It provides the

connectors and load switch to use the USB 2.0 On-The-Go (OTG) controller to implement a USB device, USB host,

or OTG operation. It also has two CAN transceivers and connectors to allow connection to two independent CAN

networks. Connectors are provided to enable connection to two of the I

C busses supported by the Max32.

In addition to the communications features, the Network Shield also has a 256Kbit I

C EEPROM for non-volatile

data storage and a 32.768 kHz oscillator for using the real-time clock/calendar (RTCC) peripheral in the PIC32

microcontroller.

The Network Shield has the same form factor as the Max32 board.

The chipKIT Network Shield board.

 An SMSC LAN8720 10/100 Ethernet PHY

 An RJ45 connector with integral magnetics

 A USB device and host connectors

 Two MCP2551 CAN transceivers

 Two 12-pin header connectors for CAN

 Two I

C daisy chain connectors

 A 256Kbit I

C EEPROM

 A 32.768 kHz oscillator

Features include:

1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - Overview

1300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com chipKIT™ Network Shield™ Board Reference Manual Revised December 29, 2014 This

Strany 2

Strany 3 - 2.2 Ethernet Interface

Strany 4

Strany 5 - 2.3 USB Interface

Strany 6 - 2.4 CAN Interface

Strany 7

Strany 8 - 2.5.1 EEPROM

Strany 9 - 2.6 32.768 KHz Oscillator

Strany 10

Komentáře k této Příručce

Žádné komentáře

Digilent 410-211P-KIT Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Digilent 410-211P-KIT. Digilent 410-211P-KIT User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Digilent 410-211P-KIT Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Digilent 410-211P-KIT. Digilent 410-211P-KIT User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Hardware Digilent 410-211P-KIT