Digilent Embedded Linux Uživatelský manuál stáhnout pdf (Strana 19)

Using Zynq with Linux

www.digilentinc.com page 19 of 23

system specified in the boot command cannot be found and thus the kernel panics due to the failure

of mounting the root file system.

Example 19.

The Oops message should include the Oops location info and it dumps the current CPU registers and

stacks, followed by a back trace of the called functions. In Example 20, we generated the Oops

message in the __dma_alloc that the drm_get_platform_dev function evoked according to the

function back trace information. This is probably a DMA memory management error in the code. For

more information on Oops messages, you may refer to the oops-tracing.txt under the Linux

kernel source Documentation folder.

[ 1.050000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)

[ 1.050000] CPU0: stopping

[ 1.050000] [<c0012920>] (unwind_backtrace+0x0/0xe0) from [<c0011c10>] (handle_IPI+0xf4/0x164)

[ 1.050000] [<c0011c10>] (handle_IPI+0xf4/0x164) from [<c00084c0>] (gic_handle_irq+0x90/0x9c)

[ 1.050000] [<c00084c0>] (gic_handle_irq+0x90/0x9c) from [<c000d240>] (__irq_svc+0x40/0x70)

[ 1.050000] Exception stack(0xd8b11c90 to 0xd8b11cd8)

[ 1.050000] 1c80: c04651b4 00000001 c0465214 c0465214

[ 1.050000] 1ca0: 00000032 00000001 00000003 c0486fa1 60000113 0000000f d8b11cf5 00000000

[ 1.050000] 1cc0: d8b10038 d8b11cd8 c001f744 c001f748 60000113 ffffffff

[ 1.050000] [<c000d240>] (__irq_svc+0x40/0x70) from [<c001f748>] (vprintk+0x384/0x3d0)

[ 1.050000] [<c001f748>] (vprintk+0x384/0x3d0) from [<c02f3188>] (printk+0x18/0x24)

[ 1.050000] [<c02f3188>] (printk+0x18/0x24) from [<c0185034>] (drm_mode_probed_add+0x30/0x4c)

[ 1.050000] [<c0185034>] (drm_mode_probed_add+0x30/0x4c) from [<c018aa34>]

(do_detailed_mode+0x328/0x35c)

[ 1.050000] [<c018aa34>] (do_detailed_mode+0x328/0x35c) from [<c0189788>]

(drm_for_each_detailed_block+0x88/0xf4)

[ 1.050000] [<c0189788>] (drm_for_each_detailed_block+0x88/0xf4) from [<c018ab98>]

(drm_add_edid_modes+0x130/0x61c)

[ 1.050000] [<c018ab98>] (drm_add_edid_modes+0x130/0x61c) from [<c018e89c>]

(adv7511_get_modes+0x90/0xa4)

[ 1.050000] [<c018e89c>] (adv7511_get_modes+0x90/0xa4) from [<c018d44c>]

(analog_drm_connector_get_modes+0x88/0x94)

[ 1.050000] [<c018d44c>] (analog_drm_connector_get_modes+0x88/0x94) from [<c01792c0>]

(drm_helper_probe_single_connector_modes+0x110/0x2c0)

[ 1.050000] [<c01792c0>] (drm_helper_probe_single_connector_modes+0x110/0x2c0) from [<c0176c7c>]

(drm_fb_helper_probe_connector_modes+0x40/0x58)

[ 1.050000] [<c0176c7c>] (drm_fb_helper_probe_connector_modes+0x40/0x58) from [<c01784f4>]

(drm_fb_helper_initial_config+0x150/0x1b0)

[ 1.050000] [<c01784f4>] (drm_fb_helper_initial_config+0x150/0x1b0) from [<c018e668>]

(analog_drm_fbdev_init+0xc0/0x104)

[ 1.050000] [<c018e668>] (analog_drm_fbdev_init+0xc0/0x104) from [<c018dbe0>]

(analog_drm_load+0xe0/0x128)

[ 1.050000] [<c018dbe0>] (analog_drm_load+0xe0/0x128) from [<c01825d4>]

(drm_get_platform_dev+0xe0/0x1bc)

[ 1.050000] [<c01825d4>] (drm_get_platform_dev+0xe0/0x1bc) from [<c0032944>]

(process_one_work+0x1d4/0x304)

[ 1.050000] [<c0032944>] (process_one_work+0x1d4/0x304) from [<c0032f40>] (worker_thread+0x1a8/0x2c0)

[ 1.050000] [<c0032f40>] (worker_thread+0x1a8/0x2c0) from [<c00361f4>] (kthread+0x80/0x8c)

1 2 ... 14 15 16 17 18 19 20 21 22 23

Komentáře k této Příručce

Žádné komentáře

Digilent Embedded Linux Uživatelský manuál Strana 19

Komentáře k této Příručce

Související produkty a manuály pro Hardware Digilent Embedded Linux